No VNCDSSCA address for subsystem xxxx
Description: The operator issued the SSINFO command to display subsystem information. The agent is unable to locate the VNAC Subsystem Control Area.
Action: Take a system dump of the agent, including ECSA, and contact SDS Technical Support.
Unable to locate SSCT for xxxx subsystem
Description: The operator issued the SSINFO command to display subsystem information. The agent is unable to locate the z/OS SSCT for the subsystem.
Action: Take a system dump of the agent, including ECSA, and contact SDS Technical Support.
Invalid command: command
Description: The agent subsystem interface received a command work element, but the element contained an unknown command.
Action: Contact SDS Technical Support.
Agent has not connected to subsystem xxxx
Description: The operator issued the SSINFO command to display subsystem information. The agent is configured to connect to subsystem xxxx but is not currently connected.
Action: Review the VNAC agent logs and job log for additional messages that may indicate why the agent did not connect to the named subsystem.
Command Timeout is nnn seconds
Description: The operator issued the SSINFO command to display subsystem information. The subsystem will wait up to nnn seconds for an acknowledgement from the agent before timing out.
Action: None.
CPF scope is scope
Description: The operator issued the SSINFO command to display subsystem information. The scope of the command prefix string is scope where scope is SYSTEM or SYSPLEX.
Action: None.
This agent is configured to use CPF string = cpf string
Description: The operator issued the SSINFO command to display subsystem information. The agent is using the Command Prefix String cpf string.
Action: None.
This agent is configured to use subsystem = xxxx
Description: The operator issued the SSINFO command to display subsystem information. The agent is connected to the subsystem xxxx.
Action: None.
No command prefix string is defined for this agent
Description: The operator issued the SSINFO command to display subsystem information, but the agent is not using a subsystem because the agent GlobalConfig configuration CPF parameter was not specified.
Action: If this is correct, no action is required; otherwise, specify the missing parameter in the agent GlobalConfig configuration section and restart the agent.
No subsystem name is defined for this agent
Description: The operator issued the SSINFO command to display subsystem information, but the agent is not using a subsystem because the agent GlobalConfig configuration SubSystem parameter was not specified.
Action: If this is correct, no action is required; otherwise, specify the missing parameter in the agent GlobalConfig configuration section and restart the agent.
