SAWconfig: An OBEYFILE signal has been received
A service external to the SAW task has completed an OBEYFILE command that may or may not affect the SAW configuration. That external service has signaled the SAW task to wake up and make that determination. If SAW configuration has changed, the SAW task will announce the fact and make the required changes.
SAWSTAT: End Session Awareness Monitor configuration, status, and statistics
This is the final response message to the SAWSTAT command.
SAWSTAT: Server server-name server-status. MsgsRcvd=nn. MsgsSent=nn
This message identifies the name of a VNAC server (server-name) and its current relationship ($P1) with the VNAC agent. MsgsRcvd is a count of messages received from the VNAC server. MsgsSent is a count of the number of messages sent to the VNAC server.
SAWSTAT: SmfStype2=nn, SmfStype3=nn, SmfStype5=nn, SmfStype6=nn, SmfStype7=nn
SmfStype2 is the number of SMF subtype 2 records written which indicate that a previously started session has now ended.
SmfStype3 is the number of SMF subtype 3 records written which indicate that a new session has started but not yet ended.
SmfStype5 is the number of SMF subtype 5 records written which indicate that a new session has both started and ended.
SmfStype6 is the number of SMF subtype 6 records written which indicate that a new session has ended due to bind failure.
SmfStype7 is the number of SMF subtype 7 records written which indicate that a new session has ended due to init failure.
SAWSTAT: FillLimit=limit-value, FillHighUsed=high-value, FillLowUnused=low-value
The SAWS data structure used to contain information about a session is a fixed length structure that is incapable of growing beyond its defined length. This message tracks high/low water marks within the SAWS structure. The purpose is to provide warning if and when SDS must redefine the SAWS data structure to be bigger.
SAWSTAT: DeletedSAWS=nn, IgnoredSAWS=nn
DeletedSAWS is the number of sessions that were deleted from the repository for various reasons.
IgnoredSAWS is the number of sessions within the repository that are currently being ignored for various reasons.
SAWSTAT: TotalSAWS=nn, TotalSAWT=0, TotalSAWL=nn
This message provides counts of data structures used by the SAW task.
TotalSAWS is the number of sessions currently contained within the repository.
TotalSAWT is reserved for future use and will be zero.
TotalSAWL is the number of VNAC servers that are listening for SAW data.
SAWSTAT: SessaDeliverRU=nn, TraceDeliverRU=nn, OtherDeliverRU=nn
This message provides counts of the number of various types of data received from VTAM.
SAWSTAT: SAWTIMER periodicity = hh:mm:ss = approximately nn minutes
This message describes the frequency of the SAWTIMER which triggers automatic retry of SAWSTART, and automatic SAWPRUNE.
SAWSTAT: OptionFlag=bit-value, SnapFlag=bit-value, TestFlag=bit-value
These flags summarize the execution characteristics invoked by operator command. Ordinarily each of these flags will have a value of 0x00.
