SAWSTART: Retry periodicity = hh:mm:ss = approximately nn minutes. Most failed retries are silent.
This message describes the frequency of SAWSTART retry attempts. Failed retry attempts are silent unless the reason for the error is different than that for the previous failure.
SAWSTART still in retry mode due to previous failure
This message is issued approximately every hour as a reminder that the SAWSTART service is still in retry mode.
SAWSTART failed. Will automatically retry SAWSTART in about nn minute(s).
The VNAC agent failed in its attempt to collect SAW data from the VTAM CNM interface. SAWDIAG messages will describe the nature of the failure.
SAWSTART complete. Will automatically retry SAWSTART in the event of failure.
The VNAC agent is actively collecting SAW data from VTAM through the CNM interface. In the event of a subsequent failure, the VNAC agent will automatically restart this process.
SAWSTART is underway. Will automatically retry if SAWSTART fails.
The SAWSTART is underway as an asynchronous process. It may succeed of fail. Later occurring messages will describe the success or failure of this process. Alternatively, you may issue the SAWSTAT command to ascertain progress.
SAWSTART already in effect. Recommend SAWRECYCLE.
The SAWSTART command cannot be serviced because SAW collections are already started. If your intent is to restart SAW, issue the SAWERCYCLE command instead.
SAWSTART: Not configured for SAW. Recommend configuring SAW and retrying SAWSTART.
The SAWSTART command cannot be serviced because the VNAC agent is not configured for SAW. Complete the SAW configuration definition. Use the OBEYFILE command to install the SAW configuration. Then the SAWSTART command becomes viable.
SAWRECYCLE: Performed SAWSTOP followed by SAWSTART
The SAWRECYCLE command is complete.
SAWRECYCLE: Performing SAWSTOP followed by SAWSTART
The SAWRECYCLE command is underway.
SAWPRUNE: nn ended sessions pruned from repository at your request
This message gives the number of SAW records (nn) that were pruned as a result of the SAWPRUNE command.
