Wiki Category: VNC12nn: VNAC Command Prefix

Error defining subsystem to z/OS

VNAC encountered an error while defining the VNAC subsystem to z/OS.
Destination: VNCOUT, VNCLOG, and GUI console.

Action: Collect the agent job output and contact SDS Technical Support.

Error sending SWE to SS task. Unable to process command.

Description: The operator issued the SSINFO command to display subsystem information. The agent was unable to pass the SWE (SDS Common Interface Work Element) control block to the Subsystem task. The command is not processed by the agent.

Action: Review the agent logs for additional messages that may indicate why the agent was unable to send the SWE to the agent subsystem control task. Contact SDS Technical Support.

Error allocating SWE. Unable to process command.

Description: The operator issued the SSINFO command to display subsystem information. The agent was unable to obtain an SWE (SDS Common Interface Work Element) control block. The command is not processed by the agent.

Action: Review the agent logs for additional messages that may indicate why the agent was unable to obtain the SWE. Contact SDS Technical Support.

pgmid ptfno asmdate asmtime entrypoint

Description: The operator issued the SSINFO command to display subsystem information. This message shows the program name, service level, assembly date and time, and entry point for each service routine in use by the subsystem to which this agent is connected.

Action: None.

Program Update Assembly date/time

Description: The operator issued the SSINFO command to display subsystem information. Information about the VNAC subsystem service routines in use follows. This is a title line for the service routine information.

Action: None.

Service Routine Service Information

Description: The operator issued the SSINFO command to display subsystem information. Information about the VNAC subsystem service routines in use follows.

Action: None.

xxxx Subsystem Vector Table not initialized

Description: The operator issued the SSINFO command to display subsystem information. The subsystem vector table for subsystem xxxx is not initialized.

Action: Review the VNAC agent logs and job log for additional messages that may indicate why the subsystem vector table failed to initialize.

Invalid VNCDSSCA eye catcher for subsystem xxxx

Description: The operator issued the SSINFO command to display subsystem information. The storage area addressed by the z/OS SSCT for subsystem xxxx contains an invalid eyecatcher.

Action: Take a system dump of the agent, including ECSA, and contact SDS Technical Support.

No VNCDSSCA address for subsystem xxxx

Description: The operator issued the SSINFO command to display subsystem information. The agent is unable to locate the VNAC Subsystem Control Area.

Action: Take a system dump of the agent, including ECSA, and contact SDS Technical Support.

Unable to locate SSCT for xxxx subsystem

Description: The operator issued the SSINFO command to display subsystem information. The agent is unable to locate the z/OS SSCT for the subsystem.

Action: Take a system dump of the agent, including ECSA, and contact SDS Technical Support.